Start with the symptom, not the component
An inverter fault does not automatically mean a power transistor or capacitor has failed. The same visible symptom can come from settings, batteries, wiring, cooling, sensing, control power supplies, or the power stage itself.
A useful diagnosis starts by recording what the inverter was doing before the fault, the exact error code, the battery and PV conditions, and whether the problem is repeatable.
Warning signs that deserve inspection
- Repeated error codes or unexplained shutdowns.
- No AC output even though the display powers on.
- Battery charging that stops, starts, or behaves abnormally.
- Fans that do not run when the inverter is hot, or fans that are unusually noisy.
- A burning smell, visible heat damage, or discolored connectors.
- Unexpected overload faults with normal loads.
- Battery communication errors or incorrect state-of-charge information.
- Backup time that suddenly becomes much worse than before.
What a professional diagnosis normally checks
A proper inspection may include visual checks, short-circuit checks, battery and DC-bus measurements, power-rail verification, cooling inspection, driver and sensing checks, and controlled testing after the suspected fault is corrected.
High-voltage inverters can retain dangerous energy after power is removed. Internal board-level work should be done with the correct isolation, discharge procedure, instruments, and experience.
What to send before requesting repair
- Inverter brand and exact model.
- The displayed fault or error code.
- Battery type and system voltage if known.
- Clear photos of the inverter and installation.
- A short description of what happened immediately before the fault.
NEED HELP WITH YOUR SYSTEM?
Send the actual details for a useful first assessment.
For inverter faults, include the brand, exact model, error code, battery type, and clear photos. For solar design or upgrades, include the load and existing equipment where possible.
Request a Diagnosis / Quote